All heavy duty steel construction, easy to install and available with 2' ball receiver. Includes Pins and clips. The Super Beetle Tow Bar includes mounting plate.

I do have some 1 7/8 units still in stock. $79.00  ( However they have been discontinued)

3131-7 Tow Bar only Super Beetle, 2" 69.99

3190    Mounting Plate Only for the 3131 unit  49.99

Easy to adapt to most cars. Complete with mounting plate and hardware. May require drilling or fitting. (Intended for light duty use ONLY)

This item brings back another old favorite with the reproduction of the ever popular and useful spare tire tool b ox. . Fits all stock and chrome rims that utilize hub cap clips, Tools should be considered for show only. Excellent addition to that restoration project and final touch on that Classic VW. Allow 1-4 days shipping or will call on this item.

Features Heavy gauge steel for strength an 4 Industrial Swivel caster wheels for stability.

The Helping hand tool, helps loosen the hi torqued axle and gland nuts by holding the drum or flywheel steady. Special order 1-4 days for shipping or Will Call.

Made from high impoact wear and abrasion sistant plastic. Aligns clutch disc with pilot bearing.

Type 1, Bug, Ghia & Thing 1949-1979, Type 2 Bus 1950-1971 (1200cc to 1600cc), Type 3, 1963-1973 (1500cc-1600cc), Vanagon, Diesel 1982-1984, Dasher 1975-81, Fox 1987-93,

Type 1, Bug, Ghia Autostick 1968-1974

Type 2 Bus 1972-79, Type 4, 411-412, 1971-74, (1700cc-1800cc), Vanagon, Gas 1980-1992, Quantum, Diesel 1983-85,

Rabbit, Scirocco, Golf, Jeta, 1974-97, (NOT 16V), Cabriolet, Cabrio, 1985-98, Quantom, Gas 1982-85

Quantom, 5 cylinder 1983-88

All 16 Valve VW, New Beetle, Gas 1998-99

Corrado, Passat 1989-95

Mounts to work bench. Features swivel head. Use fo rholding engines or transmissions. 1 5/8" male tuve that slides into mount.

Holds Engine and transmission. Features swivel head, Heavy Duty Steel construction with metal casters fo mobility. Knock down style allows for UPS shipment. (35.00 within the lower 48 states ONLY) The tool/oil tray combo is available as an add on kit to the existing stand. Weld on tabs are provided for older model stands that do not have mount tabs. It can be positioned below the engine to hold an oil pan while still allowing for full motor rotation or it can be installed on the back of the stand to hold tools and parts. In this position it can also be folded down for easy storage.

Use with common Pliers

Easily installs rear main seal using stock gland nut.

Installs rear main seal without removin dowell pins.

Removes/ Installs top shock retaining nut.

Provides perfect positioning for drilling extra dowel pin holes in crank & flywheel for 8 dowel pin installation.

Easily and correctly removes VW and Porsche crank timing gear. Also removes 3rd and 4th transmission gear set.

With our KD type 7/16 " Inserts and the Tap and Reamer tool the job can be done the quick and easy way. Head Removal is not necessary bit it is recommended.

Installs all Vw press in dondenser wires.

use this tool with your 1/2" breaker bar. For all Type 1, 3, 4 and Type 2 bus 1962 and earlier.

All Vehicle sensor removal tool

Remove your gland or axle nuts with this socket and your breaker bar

Accurately check critical keck height for appropriate valve clearance and compression.

Holds lifters in place during engine assembly

For adjusting camshaft belt tension

Djust out, Lock down, measure and cut push rods.

Insert in the oil pump hole and expand the case halves.

Helps Multiply torque when tightening gland nuts and axle nuts

Sold by the case ONLY. I cannot ship this item air.

Applied to all bearing surfaces, cam and cam followers during assembly, this high grade moly lube insures proper lubrication upon initial engine start up and run in.

Cannot ship via Air

Proper synchronization of dual carburetor set ups is essential for peak performance. Accurately dial in your carbs with one of these. 5746 is the orginal SU style/type bubble gauge with pivoting gauge tube for down draft or side draft applications.  43-5712 includes two adapters which allows for 1-tool usage on a wide spectrum of applications. The Pro Synchronizer will not restrict airflow and feature an easy to read 1-30 kg/h numbered scale for precise synchronization.

Sometimes referred as the Snail tool

Easily adjusts air mixture on bosch CIS systems

Locks Diesel injection Pump in place when changing the timinig belt.

Locks camshaft in place when changing the diesel timing belt.

Safely remove coil springs from struts. Tightens and compresses springs together.

Aluminum Construction, with hnged lid. Throw your tools in the bottom strap your cooler on top and go. Both have a 3" tall tool box and both ared 6" overall height. Supplied with Straps.

3' tall tool box and are 6" overall height. Supplied with straps.

Loop through buckle on one end and Velcro on the other.

Loop through buckle on one end and Velcro on the other.

An attractive and compact method of carrying your emergency tools in your offroad vehicle, street rod, or boat. Made from 3 1/2" Polished aluminum tube, the lid snaps into place and is secured with a screw in knob. Available for both bolt on an clamp on applications. Clamp on is for 1 1/2".

Measures 5 1/2" x 4 1/4" x 6". Carries the standard 1qrt. oil bottles

Measures 10 1/2" x 4 1/4" x 6.